Truck Ovens
Truck Ovens
Hard working ovens designed for baking, drying, preheating or any other application. Complete with temperature controllers that offer the latest in heat-sensing technology and built-in floor level guide tracks that make truck loading easy.
Truck Ovens Model Specifications:
CAUTION: Ovens processing combustible material are required by National Fire Protection Association 86 Standard for Ovens and Furnaces (NFPA 86) to have a fire suppression system. If flammable solvents or vapors are present in an oven, OSHA requires conformance with NFPA 86 Class A Oven requirements. A powered forced exhauster and other non-standard safety equipment must be added. See Class A Oven Equipment for Solvent Processing resource page, reference our FAQs or contact us us for more information.
Model | Workspace | Outside Dimensions*(WxDxH) | Max Temp | Blower | Heat Input | Insulation Thickness | Operating Characteristics† | Approx Shipping Weight | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions(WxDxH) | VolumeCu Ft | CFM | HP | ElectricKW | GasBTU/HR | Control Accuracy | Temperature Uniformity | Rise Time (Electric) | Rise Time (Gas) | |||||
TA-550 | 36" x 36" x 60" | 45 | 56" x 67" x 74" | 550°F | 1,000 | ¾ | 18 | 200,000 | 6" | ± 0.3% | ± 5°F | 30 | 15 | 2,030 lbs |
TB-550 | 48" x 48" x 60" | 80 | 68" x 79" x 74" | 550°F | 1,200 | 1 | 24 | 200,000 | 6" | ± 0.3% | ± 5°F | 30 | 15 | 2,400 lbs |
TC-550 | 60" x 60" x 60" | 125 | 80" x 91" x 74" | 550°F | 2,000 | 2 | 24 | 200,000 | 6" | ± 0.3% | ± 5°F | 38 | 15 | 2,975 lbs |
TAH-550 | 36" x 36" x 60" | 45 | 56" x 67" x 74" | 550°F | 1,600 | 1 ½ | 18 | 200,000 | 6" | ± 0.3% | ± 5°F | 30 | 15 | 2,130 lbs |
TBH-550 | 48" x 48" x 60" | 80 | 68" x 79" x 74" | 550°F | 2,000 | 2 | 24 | 200,000 | 6" | ± 0.3% | ± 5°F | 30 | 15 | 2,550 lbs |
TCH-550 | 60" x 60" x 60" | 125 | 80" x 91" x 74" | 550°F | 2,000 | 2 | 24 | 200,000 | 6" | ± 0.3% | ± 5°F | 38 | 15 | 3,160 lbs |
* Outside Dimensions
† Operating Characteristics
- Accuracy as percent of controller span.
- Uniformity at 50°F below maximum temperature.
- Rise Time in minutes to 50°F below maximum temperature.
- Tests run with empty oven and minimum exhaust.
- Performance will vary with load and application.
- See Control & Instrumentation Summary for additional details.
Specifications for Truck Ovens
MODEL | TA-550 |
---|---|
MAXIMUM OPERATING TEMP | 550°F |
AIR FLOW | Bottom to Top, Forced Convection |
CONTROL ACCURACY | ± 0.3% |
OVEN UNIFORMITY | ± 5°F |
RISE TIME - ELECTRIC | 30 mins |
RISE TIME - GAS | 15mins |
WORKS SPACE DIMENSIONS (WxDxH) | 36" x 36" x 60" |
SHELVES INCLUDED | None |
NUMBER OF SHELVES MAX | 12 |
SHELF CAPACITY | 100 |
MAX LOAD CAPACITY | Not Available |
DOORS | Manual |
LOADING METHOD | Cart or Truck |
APPROXIMATE SHIP WEIGHT | 2030 lbs |
OUTSIDE DIMENSIONS (WxDxH) | 56" x 67" x 74" |
Standard Features for Truck Ovens
Certifications
- UL Listed Control Panel
- Meets the Requirements of the Following Standards:
- NFPA 86 (Standard for Ovens and Furnaces)
- NFPA 70 (National Electric Code)
- FM (Factory Mutual)
- OSHA
- Caution:
- When processing combustible material fire protection should be considered
- Processing flammable solvents or vapors requires forced exhaust to provide safety ventilation. For more information see Class A Solvent Processing page at this website
Safety Equipment
- Adjustable manual reset excess temperature interlock to turn off heat on malfunction of main temperature controller
- Recirculating blower air flow safety switch to turn off heat on loss of recirculated air flow
- Electrical interlock shuts off heat if power to recirculating blower is interrupted
- Electric Heat Includes
- Separate heating element control contactors to turn off heat on malfunction of main control contactors
- Gas Heat Includes
- Modulating burner for 1000 BTU per cubic foot natural gas at 6” water column pressure – propane available. Inlet 1” NPT
- Automatic pre-ignition purge period to clear accumulated gas or fumes
- Push button electric ignition
- Microprocessor based electronic flame safeguard protection to continuously monitor flame and close gas valves if flame is not present
- 325 CFM powered forced exhauster to provide combustion venting
- Exhauster air flow safety switch to close gas valves on loss of venting
- Two pilot valves to guarantee gas flow to pilot can be stopped
- High and Low gas pressure switches to confirm safe operating pressure range
- Two main burner safety shut off valves with valve seat position indicator to assure gas flow to main burner can be stopped
- Proof of closure switch on one main valve to prevent igniting pilot unless main valve is closed
- Leak test station at each pilot and main burner valve to allow testing for leakage through valve
Controls
- Digital temperature controller
- Motor control push buttons and on-off heat switch
- LED pilot lights
- 5 kA short circuit current rating (SCCR)
Construction
- Choice of
- Recirculating air flow patterns – Combination or Horizontal air flow
- Electric or Gas heat
- 208 volt, 230 volt or 460 volt, 3-phase, 60 HZ – other input power available
- All welded construction
- Durable, electrically isolated, Incoloy tubular heating elements
- Heat source located in heat chamber to prevent radiant heating
- High pressure carbon steel recirculating blower
- Adjustable fresh air intake and 4” diameter (6” on Gas Heat) exhaust outlet damper
- Insulated with 10 lbs per cubic foot density rockwool insulation
- Aluminized steel interior
- Aluminized steel exterior with Trilite Green enamel finish
- Brushed stainless steel control panel face
- Heavy duty doors with explosion venting latches
- Slip flashing at doorway to allow inner oven to expand without affecting door sealing
- Silicone rubber door gasket
- Full coverage supply and return duct work with adjustable opposed louvers on horizontal air flow models
- Insulated floor with 2” wide truck tracks on 24” centers in 36” wide work space; 36” centers in 48” wide work space and 48” centers in 60” wide work space
- Fully assembled and factory tested for temperature uniformity
- 1 year limited warranty
Modifications & Accessories for Truck Ovens
-
Nickel Plated Carbon Steel Shelf
Oven accessory adding a nickel plated carbon steel shelf with maximum distributed load of either 50lbs 100lbs, or 200lbs depending on the oven model.
-
Stainless Steel Shelf
Oven accessory adding a Stainless Steel Shelf with maximum distributed load of either 50lbs, 100lbs or 200lbs depending on oven model.
-
Shelf Truck
Oven accessory adding an aluminized steel Shelf Truck with 700 lbs. capacity.
Scroll down to the bottom of the page for additional details.
-
Heavy Duty Shelf Truck
Oven accessory adding a Heavy Duty, 1200 lbs. capacity carbon steel shelf truck.
Scroll down to the bottom of the page for additional details.
-
Stainless Steel Heavy Duty Shelf Truck
Oven accessory adding a Stainless Steel Heavy Duty Shelf Truck with 1200 lbs. capacity.
Scroll down to the bottom of the page for additional details.
-
Stainless Steel Shelf Truck
Oven accessory adding a Stainless Steel Shelf truck with 700 lbs. capacity.
Scroll down to the bottom of the page for additional details.
-
Special Truck Tracks Or No Floor
Oven modification adding a Special Truck Tracks Or No Floor (non-insulated floor with a steel plate)
-
Programmable Temperature Controller
Oven modification adding a programmable Temperature Controller. Microprocessor based, digital indicating, thermocouple actuated, in lieu of standard controller.
-Program Parameters: 40 profiles of up to 50 steps each, a real-time clock with battery backup to allow starting profile at any time of day
-Digital Display, 4.3” color touch screen
-Accuracy, ±0.1% of span plus 1 degree display error
-Connectivity, Relay output for alarm or other notification, two (2) USB ports, Ethernet compatible
Also Available:
-Up to four (4) control channels of temperature, relative humidity or vacuum
-Monitor up to16 sensors
-Math and logic functions
-Digital inputs and outputs
-Data logging
-Graphic Trending
-
Digital Timing Temperature Controller
Modification adding a Digital Timing Temperature Controller. Microprocessor based, incorporates 99 hour 59 minute timer, starts timing temperature reaches set point and shuts down oven at end of set time.
- Digital Display, two LED, alphanumeric, 4 digit displays; 0.875″ high for temperature display and 0.500″ high for set point display
- Accuracy, ±0.1% of span plus 1 degree display error
Custom Ovens
-
Modified Model TAH-550 Truck Oven
Serial #: 641327Double doors front and rear with top mounted heat chamber
- MAX TEMP: 500ºF
- WORKSPACE DIMS (WxDxH): 36" x 36" x 60"
-
Modified Model TAH-500 Truck Oven
Serial #: 641407Paint baking truck oven with top mounted control panel
- MAX TEMP: 500ºF
- WORKSPACE DIMS (WxDxH): 39" x 36" x 48"
-
Modified Model TB-500 Truck Oven
Serial #: 641402Oven sectioned horizontally into two pieces to fit into elevator
- MAX TEMP: 500ºF
- WORKSPACE DIMS (WxDxH): 48" x 52" x 96"
-
Modified Model TAH-500 Truck Oven
Serial #: 641420Truck oven with brushed stainless steel exterior and top heat chamber
- MAX TEMP: 600ºF
- WORKSPACE DIMS (WxDxH): 36" x 36" x 60"