Close

Vacuum Ovens

Product Image
Product Image
Product Image
Product Image

Vacuum Ovens

For process drying under vacuum or standard atmospheric conditions. High reliability operation from UL Listed hydraulic primary and back-up safety thermostats. Four models, three chamber sizes to choose from.

Vacuum Ovens Model Specifications:

Not for use with flammable solvents, vapors, or gases.

Model Workspace Outside Dimensions*(WxDxH) Max Temp Blower Heat Input Insulation Thickness Operating Characteristics† Approx Shipping Weight
Dimensions(WxDxH) VolumeCu Ft CFM HP ElectricKW GasBTU/HR Control Accuracy Temperature Uniformity Rise Time (Electric) Rise Time (Gas)
VF-220 10" x 12" x 10" 0.7 20" x 17" x 16" 428°F Not Available NA 0.6 Not Rated 3" ± 0.5% ± 9°F 90 Not Available 130 lbs
VK-220 14" x 20" x 14" 2.3 26" x 25" x 22" 428°F Not Available NA 1.6 Not Rated 3" ± 0.5% ± 9°F 120 Not Available 295 lbs
VC-280 10" x 12" x 10" 0.7 18" x 17.5" x 23" 536°F Not Available NA 1.7 Not Rated 3" ± 0.5% ± 9°F Not Rated Not Available 90 lbs
VL-280 12" x 18" x 12" 1.5 23" x 26" x 22" 536°F Not Available NA 1.4 Not Rated 3" ± 0.5% ± 9°F Not Rated Not Available 205 lbs

† Operating Characteristics

  • Accuracy and Uniformity at 212°F.
  • Rise Time in minutes to 212°F.
  • Tests run with empty oven.
  • Performance will vary with load and application.

Vacuum Ovens Model Details:

Quote

Specifications for Vacuum Ovens

MODEL VF-220
MAXIMUM OPERATING TEMP 428°F
AIR FLOW Radiant
CONTROL ACCURACY ± 0.5%
OVEN UNIFORMITY ± 9°F
RISE TIME - ELECTRIC 90 mins
RISE TIME - GAS Not Rated
WORKS SPACE DIMENSIONS (WxDxH) 10" x 12" x 10"
SHELVES INCLUDED 2
NUMBER OF SHELVES MAX 2
SHELF CAPACITY 20
MAX LOAD CAPACITY Not Available
DOORS Manual
LOADING METHOD Shelf
APPROXIMATE SHIP WEIGHT 130 lbs
OUTSIDE DIMENSIONS (WxDxH) 20" x 17" x 16"
Product Image
Product Image
Product Image
Product Image

Standard Features for Vacuum Ovens

Certifications
  • Meets the Requirements of the Following Standards:
    • NFPA 70 (National Electric Code)
    • OSHA
    • Models VF-220 and VK-220 CE certified
  • Caution:
    • When processing combustible material fire protection should be considered
    • Not for use with flammable solvents or vapors. Other models available for these applications. For more information see Class A Solvent Processing page at this website
Safety Equipment
  • Second, adjustable independent hydraulic safety thermostat controls power to heaters if primary thermostat malfunctions
Controls
  • Hydraulic thermostat
  • Pilot light to indicate heater operation
  • On-Off switch
Construction
  • 120 or 240 volt 1-phase, 50-60 HZ; 240 volt models can be operated on 208 volts with heat input reduced by 20%
  • 3-wire cord and plug on 120 volt models
  • Radiant wall heating provides uniform temperatures and total use of work space
  • Vacuum gauge
  • 3-way control valve for evacuation and flushing
  • 30” Hg vacuum capability
  • Full view tempered safety glass window
  • Work space thermometer viewed through window
  • Glass wool insulation
  • 304 stainless steel interior
  • Powder coated heavy gauge steel exterior
  • Side mounted control panel (bottom on models VC and VL)
  • Secure latch and silicone rubber door gasket to provide tight seal
  • Fully assembled and factory tested
  • 1 year limited warranty

Modifications & Accessories for Vacuum Ovens

  • Single Cylinder Vacuum Pump

    Oven modification adding a Single Cylinder Vacuum Pump. 1/6 HP motor capable of 1.8 CFM free air at 0″ Hg vacuum. Contains muffler, thermal protection, carrying handle, foot support and electric cord.

    Add to quote
  • Twin Cylinder Vacuum Pump

    Oven modification adding a Twin Cylinder Vacuum Pump. 1/3 HP motor capable of 4.5 CFM free air at 0″ Hg vacuum. Contains oil-less rocking piston pump, rubber feet and electric cord.

    Add to quote
  • Export Crating

    Modification adding a Export Crating. Full wooden crate constructed with EU certified lumber, wooden decked skid, vacuum packing with MIL-131-B Class 1 vapor barrier and desiccant, internal blocking and bracing, external steel strapping, and stenciled export markings with shipment destination.

    Add to quote

Custom ovens and furnaces tailored to your specific worksite and requirements

No two worksites are alike. That means your oven or furnace needs to be built to your exact specifications. Sometimes that will be an oven in our catalog. Otherwise, we will specially design for your application.

Custom Oven and furnace Info

custom-ovens-furnaces-product-detail

Industrial Equipment Made to Order

Your business has specific needs. We’ll make them work. We’ll build your custom oven or furnace to last for the long haul. Let’s talk.

Contact Us About Your equipment Needs