Close

Digital Control Laboratory Ovens

Product Image
Product Image
Product Image

Digital Control Laboratory Ovens

Bench ovens designed for excellent uniformity and temperature control, rapid rise and recovery times.

Digital Control Laboratory Ovens Model Specifications:

Not for use with flammable solvents, vapors, or gases. Other models available for these applications.

Model Workspace Outside Dimensions*(WxDxH) Max Temp Blower Heat Input Insulation Thickness Operating Characteristics† Approx Shipping Weight
Dimensions(WxDxH) VolumeCu Ft CFM HP ElectricKW GasBTU/HR Control Accuracy Temperature Uniformity Rise Time (Electric) Rise Time (Gas)
GSA-250 13" x 16" x 19" 2.3 21" x 22" x 28" 482°F Not Available NA 1.8 Not Rated 2" ±0.3% ± 9°F 25 Not Available 121 lbs
GSB-250 17" x 16" x 23" 3.6 25" x 22" x 32" 482°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 9°F 25 Not Available 143 lbs
GSC-250 17" x 23" x 27" 6.1 25" x 29" x 36" 482°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 9°F 25 Not Available 190 lbs
FSA-250 14" x 14" x 20" 2.3 21" x 22" x 28" 482°F Not Available NA 1.4 Not Rated 2" ±0.3% ± 7°F 20 Not Available 121 lbs
FSB-250 18" x 14" x 24" 3.5 25" x 22" x 32" 482°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 7°F 20 Not Available 148 lbs
FSC-250 18" x 21" x 28" 6.1 25" x 29" x 36" 482°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 7°F 20 Not Available 190 lbs
GAA-330 13" x 15" x 19" 2.1 21" x 22" x 28" 626°F Not Available NA 1.8 Not Rated 2" ±0.3% ± 7°F 25 Not Available 123 lbs
GAB-330 17" x 15" x 23" 3.4 25" x 22" x 32" 626°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 7°F 25 Not Available 152 lbs
GAC-330 17" x 22" x 27" 5.8 25" x 29" x 36" 626°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 7°F 25 Not Available 190 lbs
FAA-330 14" x 13" x 20" 2.1 21" x 28" x 28" 626°F Not Available NA 1.4 Not Rated 2" ±0.3% ± 4°F 20 Not Available 126 lbs
FAB-330 18" x 13" x 24" 3.3 25" x 22" x 32" 626°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 4°F 20 Not Available 143 lbs
FAC-330 18" x 20" x 28" 5.8 25" x 29" x 36" 626°F Not Available NA 3.1 Not Rated 2" ±0.3% ± 4°F 20 Not Available 190 lbs

† Operating Characteristics

  • Uniformity and temperature stability measured at 302°F.
  • Rise Time measured from 77°F to 302°F.
  • Tests run with empty oven and minimum exhaust.
  • Performance will vary with load and application.

Digital Control Laboratory Ovens Model Details:

Quote

Specifications for Digital Control Laboratory Ovens

MODEL FAA-330
MAXIMUM OPERATING TEMP 626°F
AIR FLOW Forced Convection, Front to Back
CONTROL ACCURACY ±0.3%
OVEN UNIFORMITY ± 4°F
RISE TIME - ELECTRIC 20 mins
RISE TIME - GAS Not Rated
WORKS SPACE DIMENSIONS (WxDxH) 14" x 13" x 20"
SHELVES INCLUDED 2
NUMBER OF SHELVES MAX 13
SHELF CAPACITY 55
MAX LOAD CAPACITY Not Available
DOORS Manual
LOADING METHOD Shelf
APPROXIMATE SHIP WEIGHT 126 lbs
OUTSIDE DIMENSIONS (WxDxH) 21" x 28" x 28"
Product Image
Product Image
Product Image
Product Image
Product Image

Standard Features for Digital Control Laboratory Ovens

Certifications
  • Meets the Requirements of the Following Standards:
    • NFPA 70 (National Electric Code)
    • CSA 120 volt and 208-240 volt models
    • CE 230 volt models
    • OSHA
  • Caution:
    • When processing combustible material fire protection should be considered
    • Not for use with flammable solvents or vapors. Other models available for these applications. For more information see Class A Solvent Processing page at this website
Safety Equipment
Controls
  • Digital temperature controller with built in timer and RS-232 interface
  • Standard Control System
    • Manual fresh air damper
    • Exhaust port that can be used for test leads
    • Without heat input from load, can operate as low as ambient +10°C
  • Advanced Control System
    • Start/Stop timer weekly or daily
    • Electrically controlled fresh air damper
    • Access port for test leads
    • 2 selectable blower speeds
    • Programmable dwell times, ramp times are not adjustable
    • Contacts for remote alarm
    • Connection for optional sample temperature sensor
    • Boost function for accelerated heat-up
Construction
  • Gravity Convection
    • Heated air rises from at bottom of work space
    • Exhaust vents at top of work space
  • Forced Convection
    • Heated air is gently forced into work space from outlets at each side of the front of the work space
    • Air returns at the center of the work space, is reheated and recirculated
    • Exhaust through a vent in the top of the work space
  • 120 or 208-240 volt, 1-phase, 60 HZ; 230 volt, 1-phase, 50-60 HZ
  • Durable, electrically isolated, Incoloy tubular heating elements
  • Recirculating blower
  • Adjustable fresh air intake and exhaust vents
  • Flexible shelving system
  • Insulated with 10 lbs per cubic foot density rockwool insulation
  • Stainless steel interior with plated hardware
  • Rounded interior corners for easy cleaning
  • Powder coated steel exterior
  • Easy access doors open 180°
  • Fully assembled and factory tested
  • 2 year limited warranty

Modifications & Accessories for Digital Control Laboratory Ovens

  • Digital Bench Oven Shelf

    Oven modification adding a stainless steel shelf with maximum distributed load of 55 lbs.

    Add to quote
  • Export Crating

    Modification adding a Export Crating. Full wooden crate constructed with EU certified lumber, wooden decked skid, vacuum packing with MIL-131-B Class 1 vapor barrier and desiccant, internal blocking and bracing, external steel strapping, and stenciled export markings with shipment destination.

    Add to quote

Custom ovens and furnaces tailored to your specific worksite and requirements

No two worksites are alike. That means your oven or furnace needs to be built to your exact specifications. Sometimes that will be an oven in our catalog. Otherwise, we will specially design for your application.

Custom Oven and furnace Info

custom-ovens-furnaces-product-detail

Industrial Equipment Made to Order

Your business has specific needs. We’ll make them work. We’ll build your custom oven or furnace to last for the long haul. Let’s talk.

Contact Us About Your equipment Needs