PHOTOGRAPH 810
TWO-ZONE GAS HEATED BELT CONVEYOR OVEN, Serial No. 650118
for curing aluminum pistons

-maximum operating temperature: 500°F
-workspace dimensions: 42" wide x 24' deep x 15"
-18" long open belt loading zone
-36" long insulated heat zone with 2HP/2000CFM recirculated air flow
-16" long insulated, unheated vestibule
-16' long insulated heat zone with 10HP/12,500 CFM recirculated air flow
-12" long open zone
-36" long cooling zone
-18" long open unloading zone
-350,000 BTU/HR zone 1 and 350,000 BTU/HR zone 2 installed in modulating natural gas burners
-36" wide, 1" x 1" high carbon steel flat wire conveyor belt with 1/4 HP motor drive, variable from 0.8 to 15 inches per minute
-4" insulated walls
-aluminized steel exterior
-Type 304, stainless steel interior with continuously welded seams in Zone 1
-aluminized steel interior Zone 2
-safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for gas heated equipment including 325 CFM 1/3 HP powered forced exhausters
-16" diameter tubeaxial fan driven by a 3/4 HP motor to pull room air through cooling zone